About HKTDC | Media Room | Contact HKTDC | Wish List Wish List () | My HKTDC |
Save As PDF Email this page Print this page
Qzone

Canada Proposes to Amend Energy Efficiency Standards for 20 Products

The Canadian government will accept public comments through 14 July on a proposal to amend the current mandatory minimum energy efficiency standards for consumer and commercial products by (i) increasing the stringency of the standards for 20 currently regulated product categories, (ii) making minor changes to standards or reporting requirements for eight currently regulated product categories, and (iii) repealing and replacing the regulations to remove references to obsolete and out-of-date standards and improving the organisation of the regulatory text in order to make it easier for stakeholders to find and understand the requirements that apply to them. Specifically, the proposal would do the following.

  • align with the U.S. test procedure changes, dates of manufacture and energy efficiency standards for clothes dryers, clothes washers, integrated clothes washer-dryers, commercial clothes washers, dishwashers, freezers and refrigerators
  • update reporting requirements by including new energy efficiency metrics for clothes dryers, clothes washers and clothes washer-dryers in order to ensure that the measured energy efficiency and information provided to customers best represent the latest technologies and the way these appliances are used
  • allow for clothes dryers to be tested to either the Canadian standard or the U.S. alternative test procedure (Appendix D2), consistent with the flexibility provided in the United States
  • for clothes washers, integrated clothes washer-dryers and commercial clothes washers, two progressively stringent energy efficiency standards are being proposed to align with those in the United States; the effective dates for these standards would be: dishwashers (30 May 2013), refrigerators and freezers (15 September 2014), clothes dryers (1 January 2015), clothes washers (7 May 2015 – Tier I, and 1 January 2018 – Tier II), integrated clothes washer-dryers (7 March 2015 – dryer and Tier I washer, and 1 January 2018 – Tier II washer) and commercial clothes washers (8 January 2013 – Tier I, and 1 January 2018 – Tier II)
  • for central air conditioners and heat pumps manufactured on or after 1 January 2017, the regulations would align with U.S. energy efficiency standards and test procedures that have been in effect since January 2015 (the proposed regulations would not change the standards for  split-system central air conditioners, the most common type in Canada, since the current standards for that type are already aligned with those of the United States)
  • for chillers manufactured on or after 1 June 2015, the regulations would align with American Society of Heating, Refrigeration and Air Conditioning Engineers standards that have been in effect in many U.S. states since 2010
  • for commercial refrigerators, refrigerator-freezers and freezers (self-contained) manufactured on or after 1 January 2012, the regulations would align with the U.S. standards and test procedures that have been in effect since 2012
  • for electric motors manufactured on or after 1 June 2016, the regulations would align with the standards and test procedures that will come into effect in the United States on the same date
  • for fluorescent lamp ballasts manufactured on or after 14 November 2014, the regulations would align with the standards and test procedures that have been in effect in the United States since 2014
  • for general service fluorescent lamps manufactured on or after 15 July 2012, the regulations would align with the standards have been in effect in the United States since 2012; for products manufactured on or after 26 January 2018, the regulations would align with standards and test procedures that will come into effect in the United States on the same date
  • for general service incandescent reflector lamps manufactured on or after 15 July 2012, the regulations would align with the standards and test procedures that have been in effect in the United States since 2012
  • for icemakers manufactured on or after 28 January 2018, the regulations would align with U.S. standards and test procedures that will come into effect on the same date
  • for packaged terminal air conditioners and heat pumps manufactured on or after 30 September 2012, the regulations would align with the standards and test procedures that have been in effect in the United States since 2012
  • for refrigerated beverage vending machines manufactured on or after 31 August 2012, the regulations would align with the standards and test procedures that have been in effect in the United States since 2012
  • for room air conditioners manufactured on or after 1 June 2014, the regulations would (i) align with the standards and test procedures that have been in effect in the United States since 2014 and (ii) include provisions consistent with changes to labelling recently announced by the U.S. Federal Trade Commission by allowing labels to appear either on product packaging or on the product itself
  • for gas-fired storage water heaters manufactured on or after 16 April 2017, the regulations would align average and large volume water heaters with the U.S. standards for average volume tanks that have been in effect since 2015 (the United States has implemented more stringent standards for large volume tanks that would not apply in Canada)
  • for oil-fired water heaters manufactured on or after 16 April 2017, the regulations would align with the standards that have been in effect in the United States since 2015

In general, the dates of manufacture prescribed by the proposed regulations would align with dates in the United States even if those dates have already passed in an effort to ensure consistency between the regulatory text in the Canadian and U.S. regulations. While some dates are in the past, the proposed regulations would not be implemented retroactively. Product models imported into Canada or shipped between provinces prior to the effective date of the proposed regulations would not be impacted and consumers would be able to purchase them.

In addition to the above, the proposal would repeal the regulated requirements for digital television adapters and make minor changes to the scope, reporting and compliance requirements for electric ranges, exit signs, external power supplies, gas fireplaces, through-the-wall gas furnaces, general service lamps, televisions, and large commercial air conditioners and heat pumps.

Content provided by Picture: HKTDC Research
Comments (0)
Shows local time in Hong Kong (GMT+8 hours)

HKTDC welcomes your views. Please stay on topic and be respectful of other readers.
Review our Comment Policy

*Add a comment (up to 5,000 characters)